Premiering the Newest Kanger EVOD GLASS v2 Improved Bottom DC Changeable - Black and Stainless

[dannoman]

Newest Kanger EVOD GLASS v2 Improved Bottom DC Changeable - Black and Stainless
$9.95

Brand NEW! Introducing the Kangertech EVOD Glass VERSION TWO. Kanger just released the newer version 2 EVOD glass which sports a different, much improved bottom dual coil changeable head. Our EVOD Glass v2 comes with a sizzling, vapor producing, flavor enhancing 1.5ohm dual coil version installed.

These are so new that Kanger has not ramped up the supply chain for the heads that are made especially specific for these new version 2 EVOD Glass. But, until we start getting them in, you can use any other Kanger ProTank III, Aerotanks dual coil heads in this base!

• Windowed Pyrex glass 2.0ml tank
• Bottom Dual Coil Changeable.
• Outside eGo threading.
• Removable 510 Mouthpiece but comes with a nice 510 stainless tip. You should be able to swap out with most other tips in your collection. See picture on the left.
• Comes with a 1.5ohm EVOD Glass v2 BDC that should provide sizzling, vapor producing and flavor punched vape!

Filling Your EVOD Glass v2:

• Unscrew from PV and invert your EVOD
• Unscrew the base and tilt the unit at 30 degrees or so and fill down the sides being very careful not to get juice down the inner metal air stem.
• We recommend using one of our 10ml or 15ml bottle fill kits that enable you to stick the blunted fill needle down the sides and not accidentally squirt juice out of a bottle into that middle stem
• Fill about a half mm below top of air stem then screw the base back on.
• Before you screw base back on though, re-tighten your bottom dual coil head to prevent leakage.

Kanger EVOD Glass v2 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[_JB_]

Looks like an Aspire head

 

[badkolo]

Looks like an Aspire head

these new heads are simply amazing, and no they are kanger new special coil heads, not sure why you think otherwise, 2 different companies, give em a try, youll be surprised

 

[_JB_]

these new heads are simply amazing

I hope so. I like Kanger products, I would hate for them to take a turn in the wrong direction. Have you had one of these new coils apart yet?

 

[dannoman]

^^^^^^^^

If you don't like the aspire style of heads (which these are actual Kangertech, not Aspire) you can still use the regular Kanger ProTank III/Aerotank dual coil heads, you can use either or.

 

[badkolo]

I hope so. I like Kanger products, I would hate for them to take a turn in the wrong direction. Have you had one of these new coils apart yet?

i have yes, not the same as aspire, they did these justice

 

[_JB_]

^^^^^^^^

If you don't like the aspire style of heads (which these are actual Kangertech, not Aspire) you can still use the regular Kanger ProTank III/Aerotank dual coil heads, you can use either or.

I like the way Kanger makes things interchangeable.

 

[JoanJ]

I like the fact I can change the drip tip. I prefer the sleek straighter ones and now I can use those. The price is good on these too btw

 

[_JB_]

i have yes, not the same as aspire, they did these justice

That is good to hear. I will have to try the new one and see for myself.

 

[mirthmgr]

Am I assuming correctly that since you can use the Protank III/Aerotank heads in the Evod 2, the new style of heads will work on the Aerotank? And how different is the performance between the two?

 

[dannoman]

Thats a good deduction to make but we won't actually guarantee that because there may be some other factors. But if you currently have the aerotank its worth the try of course.

Again the regular ProTank II dual coils will work with these and we will get the product specific heads in soon.

Am I assuming correctly that since you can use the Protank III/Aerotank heads in the Evod 2, the new style of heads will work on the Aerotank? And how different is the performance between the two?

 

[yiddleboge6]

Dang!!! People loving Evods.....gotta love having them in glass !!

 

[mirthmgr]

My pair of EVOD Glass v2's arrived today (thanks for the fast shipping, GotVapes!), and I just popped one of the heads into an Aerotank. I don't notice a huge difference in flavor or vapor production versus the older style of heads, but it's working beautifully. These new ones might be slightly better, but I haven't done a side-by-side with a fresh older style head.

I definitely like the "feel" of the new heads better. I've accidentally over-tightened a couple of the older style to the point that the knurled portion spins without the rest of the head, which ends up causing flooding and gurgling (I'm better at remembering to hold the silicone cap to tighten it down now). These definitely have more of an Aspire feel and look to them.

I haven't tried the full package yet, but so far so good on the heads! I'm looking forward to having the dual-coil option on a more portable form factor. Thanks, GotVapes gang!

EDIT: After swapping the tank to my best APV, I'm almost positive that I'm getting better vapor production with the new head. I think that the flavor is about the same. Definitely digging it!

 

[DragonRon]

Any idea when you will get the new improved heads?

 

[monkey39]

do not post other places to buy products in our forum, thanks

 

[monkey39]

do not post other places to buy products in our forum, thanks

Sorry, my mistake.

 

[monkey39]

Anyone know if any of the Kanger single coils will work in the Evod Glass 2? Just got a few of them in last night and started testing them today; I have it running on a Vision Spinner 1300mah, had it turned up to 4.3v and noticed that the Evod and the Vision Spinner were getting a bit hot where they joined after about 15 min of chain vaping.