Pioneer4You iPV V200 Mod
iPV V200 Mod is constructed of Zinc Alloy & Anodized Aluminium & ABS. Pioneer4You iPV V200 Mod uses dual 18650 batteries with 200W max output. With a 0.96" TFT Screen, you can clearly see the vaping data. The Intelligent on-device customizable flavor curves features soft, normal, strong, custom SXi-EQ curves, EQ1-EQ3.(Soft - Power starts at a lower rate of about 50% and slowly increases to 100%; Normal- Power remains at 100%; Strong - Power starts at a higher rate of about 150% and slowly decreases to 100%).What's more, the waterproof YiHi SX531 chipset would ensure your safety and deliver best vaping experience with multiple functions.
Details:
1. Durable Zinc alloy & Anodized Aluminium & ABS shell
2. Waterproof YiHi SX531 chip, multiple functions
3. Dual 18650 batteries, 5-200W adjustable power
4. Intelligent on-device customizable flavor curves
5. 0.96 inch TFT screen, 5 digit puff counter
6. Interchangeable magnet side battery doors
7. 30mm 510 connector, 5V/2A Type-C fast charging
8. Low battery/Battery over-charge/Time limit ignition/Overheat/Low resistance/Short circuit/Reverse polarity protection
Vandy Vape Nox Pod Kit
Nox Pod Kit is a exquisite, small and durable pod system kit. The mod is built with 1600mAh battery and can fire up to 60W max. USB Type-C charging design makes the charging fast and convenient. Nox Pod Kit comes with two pods: 4.5ml DL Pod and 3ml MTL pod. You can rotate the cartridge to adjust the airflow from DL to MTL. Nox Pod is compatible with VVC Coils.
Details:
1. Supports DL and MTL drip tip
2. Compatible with VVC Coil
3. Rotate cartridge to adjust airflow: DL/MTL airflow
4. USB Type-C charging
5. Exquisite and small, sold and durable
6. Two pod cartridges: MTL pod and DL pod
7. Upgraded Vandy chip with safety protections: Open Circuit/Over-current/10s Cut-off/Short Circuit/Over-temperature/Low Battery Protection
iPV V200 Mod is constructed of Zinc Alloy & Anodized Aluminium & ABS. Pioneer4You iPV V200 Mod uses dual 18650 batteries with 200W max output. With a 0.96" TFT Screen, you can clearly see the vaping data. The Intelligent on-device customizable flavor curves features soft, normal, strong, custom SXi-EQ curves, EQ1-EQ3.(Soft - Power starts at a lower rate of about 50% and slowly increases to 100%; Normal- Power remains at 100%; Strong - Power starts at a higher rate of about 150% and slowly decreases to 100%).What's more, the waterproof YiHi SX531 chipset would ensure your safety and deliver best vaping experience with multiple functions.
Details:
1. Durable Zinc alloy & Anodized Aluminium & ABS shell
2. Waterproof YiHi SX531 chip, multiple functions
3. Dual 18650 batteries, 5-200W adjustable power
4. Intelligent on-device customizable flavor curves
5. 0.96 inch TFT screen, 5 digit puff counter
6. Interchangeable magnet side battery doors
7. 30mm 510 connector, 5V/2A Type-C fast charging
8. Low battery/Battery over-charge/Time limit ignition/Overheat/Low resistance/Short circuit/Reverse polarity protection
Vandy Vape Nox Pod Kit
Nox Pod Kit is a exquisite, small and durable pod system kit. The mod is built with 1600mAh battery and can fire up to 60W max. USB Type-C charging design makes the charging fast and convenient. Nox Pod Kit comes with two pods: 4.5ml DL Pod and 3ml MTL pod. You can rotate the cartridge to adjust the airflow from DL to MTL. Nox Pod is compatible with VVC Coils.
Details:
1. Supports DL and MTL drip tip
2. Compatible with VVC Coil
3. Rotate cartridge to adjust airflow: DL/MTL airflow
4. USB Type-C charging
5. Exquisite and small, sold and durable
6. Two pod cartridges: MTL pod and DL pod
7. Upgraded Vandy chip with safety protections: Open Circuit/Over-current/10s Cut-off/Short Circuit/Over-temperature/Low Battery Protection
