Noisy Cricket Auto Firing

[johnnyfacemelt]

Hello Vape Fam!
I just picked up a Noisy Cricket by Wismec and through my Glacier II on it. I absolutely love it. However, after using it for an hour or so, the button or mechanism wouldn't stop firing. It scared me half to death of course, as I scrambled to disassemble it. After cleaning and reassembling, it work great for only a short time before it would stop firing yet again. And again.
Here is all I have done...
-Cleaned all the threads
-Blew out any debris that may have been in the device
-Put my batteries in the correct series of course
-Tightened and loosened my rda pin
-Screwed the hybrid adapter to my rda before inserting it
-And vice versa
-Tried putting the RDA in first
-Tired putting the button in first
-Used new Sony VCT3s and new Samsung 25rs
Thank you for any help and/or advice,
John

 

[ufaiq]

Try not to push your dripper's outer piece all the way down, leave some gap.


Sent from my iPhone using Tapatalk

 

[Scy123]

Is the firing button sticking? if so you will need to polish it. I haven't used a noisy criket, but in my mech days, polishing firing buttons for smooth operation was the norm.

 

[crxess]

Negative Battery to the Switch.
Switch must be returning clear of the insulator



Safety

 

[Paul lamb]

There is a locking mechanism on the switch

 

[edyle]

Hello Vape Fam!
I just picked up a Noisy Cricket by Wismec and through my Glacier II on it. I absolutely love it. However, after using it for an hour or so, the button or mechanism wouldn't stop firing. It scared me half to death of course, as I scrambled to disassemble it. After cleaning and reassembling, it work great for only a short time before it would stop firing yet again. And again.
Here is all I have done...
-Cleaned all the threads
-Blew out any debris that may have been in the device
-Put my batteries in the correct series of course
-Tightened and loosened my RDA pin
-Screwed the hybrid adapter to my RDA before inserting it
-And vice versa
-Tried putting the RDA in first
-Tired putting the button in first
-Used new Sony VCT3s and new Samsung 25rs
Thank you for any help and/or advice,
John

My advice is to stop using that thing.

My guess is you're got a torn battery wrapper.

Sooner or later that so-called hybrid adapter is probably going to cause you a world of trouble

 

[Mr.Mann]

I saw this happen at a vape shop with a worker's Noisy Cricket. It got noisy all right!

 

[Rabbit Slayer]

There is a locking mechanism on the switch

Are you sure about that, I have never seen a lock on it

 

[Paul lamb]

Are you sure about that, I have never seen a lock on it

Yes but it's very temperamental

When the fire but is fully installed it's a half turn back

It works(sometimes) it was never in any of the instructions etc which I find stupid

 

[Bunnykiller]

poltergiests... call the ghost busters