no atomizer found

Status
Not open for further replies.

nyiddle

Ultra Member
ECF Veteran
Apr 9, 2014
2,826
2,692
USA. State: Inebriated.
Sounds like the 510 pin on the Evic Mini VTC just isn't making connection (if I had to guess). Or the coil isn't seated properly in the Arctic. Do you have any other devices you can test the Arctic on to narrow down the cause of the problem?

I know the Evic Mini VTC has a bit of a shallow 510 pin, but I'm not sure if it can be wiggled up or adjusted.. Maybe someone with one will chime in.
 

joelud

Full Member
Dec 22, 2015
5
0
29
MD
Sounds like the 510 pin on the Evic Mini VTC just isn't making connection (if I had to guess). Or the coil isn't seated properly in the Arctic. Do you have any other devices you can test the Arctic on to narrow down the cause of the problem?

I know the Evic Mini VTC has a bit of a shallow 510 pin, but I'm not sure if it can be wiggled up or adjusted.. Maybe someone with one will chime in.
the evic mini is the only device I have unfortunately :/
 

djsvapour

ECF Guru
ECF Veteran
Oct 2, 2012
11,822
7,901
England and Wales
I have a evic mini vtc and I put my Arctic on it but it say no atomizer found but when I put my ego one mega on it, it works

thanks

Yes. Sometimes this happens. I am waiting for it to happen...(not had it yet). The eVic mini does have a shallow 510.
A Joyetech tank should always work on a Joyetech mod. Everything else is a bit of a lottery.
Both my (mini) subtanks work, the Kanthal one and the Nickel one too... they have different bases on them.
I'm trying some other stuff later. Going to rebuild some drippers and 'old school' RBAs.
 

joelud

Full Member
Dec 22, 2015
5
0
29
MD
Yes. Sometimes this happens. I am waiting for it to happen...(not had it yet). The eVic mini does have a shallow 510.
A Joyetech tank should always work on a Joyetech mod. Everything else is a bit of a lottery.
Both my (mini) subtanks work, the Kanthal one and the Nickel one too... they have different bases on them.
I'm trying some other stuff later. Going to rebuild some drippers and 'old school' RBAs.
is there any way that I might be able to make it work or and tanks you would recommend that for sure work on the evic mini
 

jacob bonilla

Super Member
Sep 4, 2015
506
122
32
if it is a 510 connect it should work otherwise you will have to bridge it with a 510 adapter. I have the evic vtc and it only says no atomizer found when the atomizer isn't on correctly, coils are too high or low of an ohm to fire, or their are no coils in it as well I believe or their is a issue with screws being loose. most atomizers will allow you to bring the pin down I am not sure how you do this but typically you just screw it out a little more but it depends on the atomizer. I have quite a few tanks and rda's/rta's it has happened to me with each one for the most part and easily fixed if you take into account knowing what is wrong with it to begin with. usually it is not the connector pins at all in my cases but loose screws/coils or atomizer isn't on tightly or coils are too low for my mod to fire.
 
Status
Not open for further replies.

Users who are viewing this thread