Once again I say hello and welcome to another vape review, today's review is on the newest generation of the Orion Pod mod Kit as the title says Orion 2 Pod mod Kit from LVE. The Orion 2 uses a internal 1500mAh battery and it's Pod's have a juice capacity of 4.5ml, you read it right 2 Pods are included with this kit. This is not your typical run of the mill Pod Mod Kit by any means just on appearance alone, now that your whistle is wet lets get to know the Orion 2 Pod Mod Kit prior to my review of it.
COLOR CHOICES
IN THE BOX
* 1pc Orion II Pod Device
* 2pc Orion II Pod
* 2pc Orion II 0.4 ohm Mesh Coil
* 1pc Type-C USB Cable
* 1pc Suction Cup Tool
* 1pc User Manual
* 1pc Warranty Card
PARAMETERS AND FEATURES
* Dimensions: 103mm by 43mm by 17.2mm
* Battery Capacity: Built-In 1500mAh Battery
* Wattage Range: 5-40W
* Resistance Range: 0.15-3.0ohm
* Chassis Material: Zinc-Alloy
* Charging: Type-C Port
* Operation: Button-Activated
* Pod Series: Orion 2 Pods
* Fill System: Threaded Top Fill
* Pod Material: PCTG
* Pod Capacity: 4.5ml
* Pod Connection: Pod Release Switch (Snap-In)
* Coil Installation: Press Fit
* Coil Support: Orion 2 Coils
* Adjustable Airflow Ring
* Magnetic Decorative Panels
* Display Screen 0.69 inch OLED Screen
* Auto Shut-Off Protection
* PCBA Overheat Protection
* No-Atomizer Protection
* Short-Circuit Protection
* Low Voltage Protection
* Over Discharge Protection
* Over Charge Protection
* USB Input Protection
* Package: Gift Box
SOLID BUILD WITH A HIGH QUALITY APPEARANCE
REPLACEABLE SIDE PANELS
1500mAh INTERNAL BATTERY
FULLY ADJUSTABLE AIRFLOW ( MTL - RDL )
FIRST IMPRESSIONS
I think this was probably the best presentation of a vape device that's been sent to me and I've have some nice ones. Beginning with the box that is sealed in plastic and has a outer sleeve that reveals a hologram on the box when sliding it off ( pretty nice effect ). Opening the box you find the Orion 2, spare 4.5ml Pod, two 0.4Ω mesh coils, USB - C charge cord, suction cup for panel removal, warranty card and user manual resting is a pre-cut foam casing inside the box.
My first thoughts were DAM it's gorgeous! Picking the device up showed it had some weight to it without being heavy. Having a second Pod and a 4.5ml pod at that shows great value in this kit. The suction cup, charge cord and warranty card are under a small piece of cardboard with the user manual sitting on top of it. I always like to start my review journey with a nice presentation and LVE went above and beyond, even the box itself has a magnetic closure to it.
Holding the Orion 2 in the hand you can feel just how solid the construction is, giving it the shake test found a tiny rattle in the adjustment buttons that's barely noticeable. I'm very pleased to report there is no rubber plug on the fill port instead a screw off cap is used with the LVE name embossed on it in raised lettering further adding to the attractive appearance. High quality screams out loudly by the way the Pod is attached as well, no magnets used here, instead a locking mechanism is used when attaching and removing the Pod from the device by way of a sliding spring loaded release switch, there's no way the Pod is coming off accidentally being in a pocket.
COLOR CHOICES
IN THE BOX
* 1pc Orion II Pod Device
* 2pc Orion II Pod
* 2pc Orion II 0.4 ohm Mesh Coil
* 1pc Type-C USB Cable
* 1pc Suction Cup Tool
* 1pc User Manual
* 1pc Warranty Card
PARAMETERS AND FEATURES
* Dimensions: 103mm by 43mm by 17.2mm
* Battery Capacity: Built-In 1500mAh Battery
* Wattage Range: 5-40W
* Resistance Range: 0.15-3.0ohm
* Chassis Material: Zinc-Alloy
* Charging: Type-C Port
* Operation: Button-Activated
* Pod Series: Orion 2 Pods
* Fill System: Threaded Top Fill
* Pod Material: PCTG
* Pod Capacity: 4.5ml
* Pod Connection: Pod Release Switch (Snap-In)
* Coil Installation: Press Fit
* Coil Support: Orion 2 Coils
* Adjustable Airflow Ring
* Magnetic Decorative Panels
* Display Screen 0.69 inch OLED Screen
* Auto Shut-Off Protection
* PCBA Overheat Protection
* No-Atomizer Protection
* Short-Circuit Protection
* Low Voltage Protection
* Over Discharge Protection
* Over Charge Protection
* USB Input Protection
* Package: Gift Box
SOLID BUILD WITH A HIGH QUALITY APPEARANCE
REPLACEABLE SIDE PANELS
1500mAh INTERNAL BATTERY
FULLY ADJUSTABLE AIRFLOW ( MTL - RDL )
FIRST IMPRESSIONS
I think this was probably the best presentation of a vape device that's been sent to me and I've have some nice ones. Beginning with the box that is sealed in plastic and has a outer sleeve that reveals a hologram on the box when sliding it off ( pretty nice effect ). Opening the box you find the Orion 2, spare 4.5ml Pod, two 0.4Ω mesh coils, USB - C charge cord, suction cup for panel removal, warranty card and user manual resting is a pre-cut foam casing inside the box.
My first thoughts were DAM it's gorgeous! Picking the device up showed it had some weight to it without being heavy. Having a second Pod and a 4.5ml pod at that shows great value in this kit. The suction cup, charge cord and warranty card are under a small piece of cardboard with the user manual sitting on top of it. I always like to start my review journey with a nice presentation and LVE went above and beyond, even the box itself has a magnetic closure to it.
Holding the Orion 2 in the hand you can feel just how solid the construction is, giving it the shake test found a tiny rattle in the adjustment buttons that's barely noticeable. I'm very pleased to report there is no rubber plug on the fill port instead a screw off cap is used with the LVE name embossed on it in raised lettering further adding to the attractive appearance. High quality screams out loudly by the way the Pod is attached as well, no magnets used here, instead a locking mechanism is used when attaching and removing the Pod from the device by way of a sliding spring loaded release switch, there's no way the Pod is coming off accidentally being in a pocket.