kanger tanks
- Thread starter jerseyman32
- Start date
- th_trl_thread_readers 0
- Status
The istick is a 510-threaded device, but some come with the 510/eGo adapter. That would handle the EVODs and mini PT2/3. The regular PT2/3 are 510-threaded, so they shouldn't need an adapter.
I use kanger mega tanks alone, and kanker protank 3's with the adapter that came with my iStick
The istick is 21mm wide at the connection. It has a regular 510 connection and an adapter for an ego-type connection.
The 'tanks' for the Kangers that have the 510 connection are 18.5mm for the regular tank, 22mm for the mega, 30mm for the giant.
The mini tanks have the eGo connection and are @14.5mm wide.
The regular tanks will fit well, hold 2.5ml on the 510 threads without an adapter.
The mega tanks will hang over the edge of the stick about 1mm but have 3.8ml capacity.
The giant will hang over greatly but even more capacity - 4.5ml.
The mini tanks will need the adapter and have a capacity of @ 1.5-1.8ml.
The protank is 18.5mm diameter hold 2.5ml.
The protank mini needs the adapter @14mm and holds 1.5ml.
The T3S needs the adapter, is 14mm and holds 3ml.
The Evod needs the adapter, is 14mm and holds 1.6ml
All but the T3S and the Evod/Evod2 are pyrex - although there is an Evod 'Glass'.
If you want one that has better capacity that doesn't stick over the edge get the regular Aerotank V2 or the Genitank.
If you want more capacity and don't mind the 1mm hangover get the Aero or Genitank mega.
eta: Another Kanger tank is the 'EMOW' and oddly the 'mega' on that one is 19mm (instead of 22mm on the other megas) and has a 2.8ml capacity. The regular EMOW is 16.5mm and 1.8ml.
The 'tanks' for the Kangers that have the 510 connection are 18.5mm for the regular tank, 22mm for the mega, 30mm for the giant.
The mini tanks have the eGo connection and are @14.5mm wide.
The regular tanks will fit well, hold 2.5ml on the 510 threads without an adapter.
The mega tanks will hang over the edge of the stick about 1mm but have 3.8ml capacity.
The giant will hang over greatly but even more capacity - 4.5ml.
The mini tanks will need the adapter and have a capacity of @ 1.5-1.8ml.
The protank is 18.5mm diameter hold 2.5ml.
The protank mini needs the adapter @14mm and holds 1.5ml.
The T3S needs the adapter, is 14mm and holds 3ml.
The Evod needs the adapter, is 14mm and holds 1.6ml
All but the T3S and the Evod/Evod2 are pyrex - although there is an Evod 'Glass'.
If you want one that has better capacity that doesn't stick over the edge get the regular Aerotank V2 or the Genitank.
If you want more capacity and don't mind the 1mm hangover get the Aero or Genitank mega.
eta: Another Kanger tank is the 'EMOW' and oddly the 'mega' on that one is 19mm (instead of 22mm on the other megas) and has a 2.8ml capacity. The regular EMOW is 16.5mm and 1.8ml.
Last edited:
I'm using the areotank mini and intend to invest in the V2 - black Friday??
If they went to 22mm on size of the iStick, I'd likely go to the mega. Also looking at genitank and emow - not totally clear on the differences - they're a bit less expensive and I see some like the AFC on the geni/emow better.
If you mean the 'center pin issue'... I have two iSticks. I'm using Aerotank mini's on both, so I'm also using the 510 to eGo adaper that came with the iStick. One has not had a problem at all. With the other, I have the same issue others have reported on the iStick thread in APV forum - that one has to loosen the threading of the clearo, slightly, in order to get it to fire. It isn't a problem but each time I refill I have to find the 'loosening' that allows firing. Too tight and I get a 'atomizer short' warning. Loosen it a bit and that goes away and everything is fine. And I'd point out that it is the clearo that needs loosening not the adapter (I've tried both
All that said, had I known how well the iStick vapes, I would have bought 4 instead of 2 (on the 1/2 price sale). Even if the other 2 would have had the same problem - iow, it's not that big a deal and yet I hope they fix that along with some other things having to do with the 'real' vs. 'RMS' wattage issue that's mentioned in Phil's video. And because of that, that you can't adjust voltage downward, with 1.8 ohm coils only, one will burn lighter flavors - so higher ohm coils are needed if that's the case. All buttons work well, are not loose, don't rattle as I've seen with other mods. The finish is great, something that again, 'other mods' have had a problem with.
One 'fix' noted is using a #60 O-ring put around the center pin.
Last edited:
- Status
Similar threads
