Joyetech problems

[Roncha]

Hello, my joyetech ego aio not working. When i push button the light is blinking, and nothing happens.

 

[smacuser]

Welcome to ecf @Roncha

If you go to use the vape pen and the LED light is blinking while you are holding down the button, that is signaling one of two things - either your battery is dead OR it is not recognizing your atomizer. If you know that your device is definitely charged, check your coil.

 

[AvaOrchid]

Hello, my joyetech ego aio not working. When i push button the light is blinking, and nothing happens.

Clean all the contacts to make sure that it's making a good connection. Reattach your coil and see if that helps The end of the coil is going to come into contact with an elevated plate inside the tank. Clean both of those where they touch. You can use vodka And then rinse very well or you can just use a q-tip and clean it.

These specific models tend to have their charge port go out before the battery life is killed through recharging. So it's very common for you to think that you're charging your device and it's not actually charging because the charge port has become disengaged. So that could also be the culprit.

The tube mod version has a better charge port than the box AIO

 

[BrotherBob]

Hello

Welcome and glad you joined.
Could contact:
Local B&M Vape Shop (Visit)/someone who knows what their doing -----Might be simple.
Vendor who sold it ---see if they will repair or replace or advise (any authorized distributor may help).
Manufacturer contact ---see if they will repair or replace or advise.

 

[Roncha]

Problem started when i removed coil.
Sometimes it blinks slowly 15 times, and sometimes 5 times fast

 

[Roncha]

Now it blinks fast 5 times when i push button

 

[ShowMeTwice]

Hi Roncha and welcome to ECF

I don't have a Joyetech ego aio but I do wish you luck with "das blinkin' lights".

 

[ShowMeTwice]

Problem started when i removed coil.
Sometimes it blinks slowly 15 times, and sometimes 5 times fast

Ummm, just a guess... you probably did not reinstall your coil correctly. Or maybe it's just a bad coil. Try a new one. Perhaps watch a tutorial video on YouTube to see how to install and prime your coil.

 

[Scor]

Hello everyone!
My eVic primo 2 stopped charging 18650 batteries.
I opened the vape to clean it up and saw the exploded part. I am trying to determine what exactly this detail is. It looks a lot like a regular battery "pill".
I am attaching a photo, I will be grateful for advice or help.

 

[somdcomputerguy]

Welcome to ECF, Roncha.

 

[somdcomputerguy]

Welcome to ECF, Scor. You shouldn't hijack threads.

 

[Scor]

Welcome to ECF, Scor. You shouldn't hijack threads.

Sorry. Just create a new thread