Hellvape Dead Rabbit MTL 2 RTA Review By Frenkyou

[Frenkyou]

Hi, today we are going to take a look at Hellvape Dead Rabbit MTL 2 rta. I will examine in this Test each of the features that distinguish this item. I hope that at the end of this reading you will have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Happy reading.

► Hellvape Dead Rabbit MTL 2 rta; Before we begin, let's take a look at some of the special features listed by the manufacturer:
• 1. 22.5mm diameter single coil rta
• 2. 6 replaceable bottom airflow pins
• 3. Postless building deck & accommodate 30GA wire
• 4. Quarter turn locking mechanism on the deck
• 5. 2ml and 4ml capacity
• 6. 510 derlin drip tip included
• 7. Leak-proof design

► Hellvape Dead Rabbit MTL 2 RTA; Packaging:
The package of the Dead Rabbit MTL 2 RTA by Hellvape features an eye-catching design, featuring a vibrant red color and black details. The front of the package highlights the Hellvape logo and a sticker indicating the color of the vaporizer, in addition to the distinctive writings of the model. On the back, the main features of the product, the contents of the package, the contacts of the manufacturing company and the certifications of conformity are reported. The sides of the box complete the image with the promotional slogan and further technical details, reflecting Hellvape's attention to packaging that communicates quality and attention to detail.

► Hellvape Dead Rabbit MTL 2 RTA; Packing List:
• 1 x Hellvape Dead Rabbit MTL 2 RTA
• 1 x 4ml Long Glass Chamber
• 1 x 0.8mm Airflow Pin
• 1 x 1.0mm Airflow Pin
• 1 x 1.2mm Airflow Pin (Pre-installed)
• 1 x 1.5mm Airflow Pin
• 1 x 1.8mm Airflow Pin
• 1 x 2.0mm Airflow Pin
• 1 x Derlin 510 Drip Tip
• 1 x 0.7Ω Ni80 Clapton Coil
• 1 x Accessory Bag
• 1 x Cotton Ties
• 1 x User Manual

► Hellvape Dead Rabbit MTL 2 RTA; Specifications:
• Capacity: 2ml / 4ml
• Dimensions: 22.5x46.6mm (2ml), 22.5x53.6mm (2ml), 22.5x59.6mm (4ml)
• 510 thread connection
• 510 drip tip
• 510 derlin drip tip included
• Type: Single coil (minimum 30GA thread)
• Top filling
• E-liquid regulation
• 6 replaceable bottom airflow pins (0.8, 1.0, 1.2, 1.5, 1.8, 2.0mm)

► Hellvape Dead Rabbit MTL 2 RTA; Available Colors:
• Matte Black
• Matte Full Black
• SS
• Blue
• Gold
• Gunmetal

► Hellvape Dead Rabbit MTL 2 RTA; First Impressions:
Hellvape, is also known for its strong impact in the sector of rebuildable MTL tanks, so it has recently launched the second version of its famous Dead Rabbit MTL. This product is super accessorized and follows the success of its predecessor, carrying on the reputation of the Dead Rabbit series. The new version of the "dead rabbit" promises to maintain the same level of quality and performance that have made the brand known to become a point of reference for vaping enthusiasts. On this renewed version we find; a variable capacity from 2 to 4 ml, liquid control, and adjustable airflow with calibrated pins for an extremely precise MTL shot. It seems that the attention to detail in the design, the captivating style, and the ease of rebuildability are aspects that are never lacking and that continue to position Hellvape as a leader in its segment.
Happy reading.

► Hellvape Dead Rabbit MTL 2 RTA; Box Mod Pairing:
A passion for vaping can often translate into a preference for certain device combinations, such as pairing a 23mm max diameter vaporizer with a Pico Mod. This preference is not uncommon among MTL enthusiasts, as the Pico Mod is renowned for its compactness and reliability, making it an ideal choice for those looking for a convenient and cost-effective vaping experience. The Dead Rabbit MTL 2 RTA fits this bill very well, offering users the ability to create a setup that meets their needs in terms of both aesthetics and performance. The satisfaction of finding the perfect combination is a significant part of the pleasure that comes from vaping, a hobby that combines technology, customization and, for many, a touch of personal style.

► Hellvape Dead Rabbit MTL 2 RTA; Large or compact:
The particularly rich package of DR 2 MTL includes two different bells (chambers), two different Pyrex glasses, and two different Drip-Tips. This allows you to best configure the length of this vaporizer according to your needs. You can easily combine DR 2 MTL with any SBS Mod, whether it has a low or high thread plan. In terms of dimensional compactness, the short Drip-Tip in Derlin is particularly interesting, because it allows you to obtain compact dimensions with both the short chamber (2ml) and the high chamber (4ml). However, I must say that even the long metal Drip-Tip (pre-installed) is able to characterize and positively enhance the aesthetic impact of DR 2 MTL, but in this case only in combination with the short chamber.

 

[Frenkyou]

► Hellvape Dead Rabbit MTL 2 RTA; Build Deck:
Maintenance and care of vaporizers are crucial to hygiene and maintaining good vapor quality. The process includes disassembly, cleaning with warm water and mild soap, and then reassembly. The precise machining tolerances and smooth, sliding threads of the DR 2 MTL not only make this process easy, but are also indicative of the vaporizer's build quality.

► Hellvape Dead Rabbit MTL 2 RTA; Quick Operations:
The DR 2's top cap is quite thin to hold, but has a knurling to make it easy to remove and install. This top cap must be removed completely to refill, the smoothness of the threads is a big plus and makes this operation quite simple. The e-liquid slots are a good size, so you can quickly refill both of your 2 or 4ml tanks. By lining up the notch on the deck with the one on the base of the tank you can quickly release the two elements, you can also do this when the tank is full of e-liquid, simply invert it. This can be useful when you want to rebuild the coil or replace the cotton without throwing away the remaining e-liquid.

► Hellvape Dead Rabbit MTL 2 RTA; Combined flow regulation:
Dead Rabbit MTL 2 RTA has a practical and intelligent e-liquid regulation system, this system also regulates the air flow in step. To regulate both flows, just grab the DR 2 with two fingers and turn it counterclockwise to close, or clockwise to open. The two opposing slots that regulate the air flow are located laterally on the deck, while the two opposing slots that regulate the e-liquid flow are located just above, inside the tank. Consequently, by turning the tank, the adjustment of the slots is synchronous, so when the airflow is half-closed you will get a little less e-liquid flow, or when the airflow is open, you will get a greater passage of e-liquid towards the cotton. Furthermore, when you have to refill, you have to rotate the upper cap counterclockwise, so the air and e-liquid slots close automatically. After filling the tank, you will close the cap again and the slots of both flows will open automatically without generating any loss of e-liquid. I was able to verify the goodness of this system during use, and with different configurations of coils and powers. In all cases I always obtained a very regular aspiration, without problems of too dry or too humid feeding.

► Hellvape Dead Rabbit MTL 2 RTA; Replaceable lower airflow pins:
This super equipped vaporizer also includes 6 different pins; 0.8/1.0/1.2mm (pre-installed) 1.5/1.8/2.0mm. This allows you to precisely customize your vaping needs in terms of extraction width. You can replace the pin with one of the other 6 available at any time. Unscrew the old pin with a flat screwdriver and screw in the new one. Unfortunately, there is no classic screwdriver in the package, but only a Phillips screwdriver.

► Hellvape Dead Rabbit MTL 2 RTA; Build Deck:
The rebuildable part uses good-sized Phillips head screws, the side bulkheads around the screws are shaped so that the wire fits perfectly to the profile of the screws without false contacts, so just tighten the screws and straighten the coil. Hellvape recommends using resistive wires with a diameter of no less than 30ga. After tightening the wire, cutting the excess legs is really easy. The supplied cotton string is long enough to be able to obtain at least three usable wicks. After inserting the cotton into the coil and cutting the ends of the cotton in line with the outer edge of the deck, simply place the cotton inside the wells without applying too much pressure.

► Hellvape Dead Rabbit Mtl 2 RTA; Final conclusions:
I always receive very willingly the novelties of Hellvape Casa, a large Chinese company that over the years has been able to improve and evolve to adapt to the various needs of the market by capturing important awards with different types of vaporizers. Hellvape did not spare, in the Dr 2 RTA package together with the rich equipment of Spare Part's we find; Two valuable drip-Tip, a short bell (2ml), and a long bell (4ml), without forgetting the 6 calibrated pins. The basic configuration provides for a 0.7Ω Clapton Ni80 coils in combination with the pivot of 1.2mm pre -installed 1.2mm. With this set up the MTL yield is perfectly calibrated for my taste. The 18W shot is not too dispersive, not even by completely opening the Airflow. With the Airflow positioned in half, the shot becomes very narrow and the blow in the throat increases exponentially. The conveying of the nicotine present in my e-liquid is truly effective and exalted. The flavor of my Too Puft settles on levels of high personal liking. The steam maintains a constant rate of humidity and even playing with the adjustment of the flows do not incur unwanted supercharging and not even in dry shots. Usually I use vaporizers with large air flow for RDL/DL, however Dead Rabbit MTL 2 RTA works damn well. I have not noticed major differences between the 2ml and 4ML configuration, both work well, perhaps the steam is slightly fresher with the 4ml room. If you have a small figure to invest definitely Dead Rabbit Mtl 2 RTA will repay you abundantly becoming your faithful vapus companion.

• I would like to thank Hellvape for providing me with this sample. I hope this review has been useful for anyone who wishes to buy Dead Rabbit MTL 2 RTA.

Hellvape - The DIY atomizer leading brand

Hellvape is one of the best manufacturers In Vape Industry. As a DIY atomizer leading brand, our Hellvape is dedicated to creating authentic, top quality and extremely unique vaping devices.

www.hellvape.com

• Thanks for reading.

 

[hittman]

Nice review Frenkyou.

 

[Frenkyou]

Nice review Frenkyou.

Thank you Hitt