Hello and welcome back for another review. Today I will be taking a look at the Hellvape Dead Rabbit 3 rta J Edition that was sent to me by Hellvape in order to provide you with a fair and honest review. This is the latest iteration of the Dead Rabbit 3 RTA. It is a dual coil rta with a liquid capacity of 3.5ml with the straight glass and 5.5ml with the included bubble glass. It has a mirror polished finish. It also comes with a hygienic Ag+ drip tip. This J (Joker) edition is inspired much like the rda J Edition that I recently reviewed by the Joker and player card designs are found throughout the entire design. I was surprised that there was not a Dead Rabbit icon on the tank.
WHAT’S IN THE BOX?
1* Dead Rabbit 3 RTA (J Edition)
2* 0.37Ω Ni80 Clapton Coil
2* Shoelace Cotton
1* Coil Cutting Tool
1* Bubble Glass
1* Accessory Bag
1* User Manual
SPECIFICATIONS:
FEATURES:
1. Exclusive Joker-inspired Edition
2. Mirror-polished finish with special joker logo
3. Hygienic Ag+ 810 drip tip
4. New laser engraved design on the bottom
INITIAL THOUGHTS:
The packaging is much like I’ve seen before from Hellvape and have become accustomed to seeing. The box is the usual orange and black color with the Hellvape logo near the top, the tank name on one side and a nice color picture on the front. The back side has a list of the features, a contents list, and company information. I received the Shiny SS Blue and the Shiny Gunmetal Purple versions for this review. Both tanks are really beautiful looking.
Once the box is opened, the rta is found sitting in a foam insert with the included 5.5ml bubble glass sitting below the tank. The 3.5ml straight glass is pre-installed. Underneath the foam insert is where the accessories are located. Included with the tank are two .37 ohm Ni80 coils, two cotton threads, a screwdriver for the slotted grub screws, an allen wrench for the spare grub screws, spare o rings, coil cutting guide, and user manual. I really like how Hellvape includes everything needed to get the tank ready for used besides eliquid.
You might be tired of hearing this by now but I always like to remind people to disassemble and clean any tank before use to remove any machining oil or debris that might have been left behind during manufacture. Not cleaning a tank can ruin the first impression by the flavor being off. Trust me, I’ve had that happen before.
The top cap and deck have matching indentations to allow the user to grip and turn them more easily. The included drip tip is Ag+ and enhanced with ant-bacterial silver ions. The metal base of the tip has the Hellvape name etched on the base. The airflow ring has a set of 16 honeycomb holes on two sides for a total of 32 airflow holes. The joker face is on the chamber but there is not a dead rabbit icon on this one. These tanks have a highly polished surface to add to the appearance and really grab your attention.
Much like the joker edition rda, the base on this tank carries through with the playing card theme with a ring of playing card symbols on the bottom of the base. Also on the base is the Hellvape name and a small joker face.
The top cap has an outer o ring and a smaller o ring to seal the top of the tank from leaking. There are two large kidney shaped fill holes and in the center you can see two small tabs sticking out that are what locks the top cap in place with a ¼ turn.
The inside of the chamber where the deck is inserted is reduced to improve flavor production. The four grub screws installed have slotted heads and there is a screwdriver included for use with these. There are also allen head screws included as spares and an allen wrench if you would like to use those instead. There are three oval and four round holes underneath where the dual coils sit to allow airflow from underneath. There are also four oval and four round holes on each side of the deck to allow airflow from the sides while it’s also hitting the coils from underneath. You can see in the third picture below that the plated 510 pin protrudes slightly from the 510 connection.
WHAT’S IN THE BOX?
1* Dead Rabbit 3 RTA (J Edition)
2* 0.37Ω Ni80 Clapton Coil
2* Shoelace Cotton
1* Coil Cutting Tool
1* Bubble Glass
1* Accessory Bag
1* User Manual
SPECIFICATIONS:
| Brand | Hellvape |
| Product Name | Dead Rabbit 3 RTA J Edition |
| Coil Type | Dual coil |
| Drip Tip | 810 |
| Capacity | 5.5ml/3.5ml |
| Color | Shiny Gold Black, Shiny S.S Blue, Shiny Gunmetal Purple |
FEATURES:
1. Exclusive Joker-inspired Edition
2. Mirror-polished finish with special joker logo
3. Hygienic Ag+ 810 drip tip
4. New laser engraved design on the bottom
INITIAL THOUGHTS:
The packaging is much like I’ve seen before from Hellvape and have become accustomed to seeing. The box is the usual orange and black color with the Hellvape logo near the top, the tank name on one side and a nice color picture on the front. The back side has a list of the features, a contents list, and company information. I received the Shiny SS Blue and the Shiny Gunmetal Purple versions for this review. Both tanks are really beautiful looking.
Once the box is opened, the rta is found sitting in a foam insert with the included 5.5ml bubble glass sitting below the tank. The 3.5ml straight glass is pre-installed. Underneath the foam insert is where the accessories are located. Included with the tank are two .37 ohm Ni80 coils, two cotton threads, a screwdriver for the slotted grub screws, an allen wrench for the spare grub screws, spare o rings, coil cutting guide, and user manual. I really like how Hellvape includes everything needed to get the tank ready for used besides eliquid.
You might be tired of hearing this by now but I always like to remind people to disassemble and clean any tank before use to remove any machining oil or debris that might have been left behind during manufacture. Not cleaning a tank can ruin the first impression by the flavor being off. Trust me, I’ve had that happen before.
The top cap and deck have matching indentations to allow the user to grip and turn them more easily. The included drip tip is Ag+ and enhanced with ant-bacterial silver ions. The metal base of the tip has the Hellvape name etched on the base. The airflow ring has a set of 16 honeycomb holes on two sides for a total of 32 airflow holes. The joker face is on the chamber but there is not a dead rabbit icon on this one. These tanks have a highly polished surface to add to the appearance and really grab your attention.
Much like the joker edition rda, the base on this tank carries through with the playing card theme with a ring of playing card symbols on the bottom of the base. Also on the base is the Hellvape name and a small joker face.
The top cap has an outer o ring and a smaller o ring to seal the top of the tank from leaking. There are two large kidney shaped fill holes and in the center you can see two small tabs sticking out that are what locks the top cap in place with a ¼ turn.
The inside of the chamber where the deck is inserted is reduced to improve flavor production. The four grub screws installed have slotted heads and there is a screwdriver included for use with these. There are also allen head screws included as spares and an allen wrench if you would like to use those instead. There are three oval and four round holes underneath where the dual coils sit to allow airflow from underneath. There are also four oval and four round holes on each side of the deck to allow airflow from the sides while it’s also hitting the coils from underneath. You can see in the third picture below that the plated 510 pin protrudes slightly from the 510 connection.
