Heating wire for Joyetech Ego one CLR Coil Head

[VapeonLivelong]

Hi guys,
I'm using the joyetech ego one 2200 mah.
I want to re build it.
But i dont know as to what type of heating wire to use.
I want it to be 1ohm.

I'm based in india.

Please advise.

 

[Katmar]

Welcome to the forum. I'm sure someone will be along to help. Good luck...

 

[Susan~S]

Look for A1 Kanthal wire. Maybe 28 gauge.

Play around with a "coiling calculator" to determine how many wraps and what size diameter tool you would need to wrap on. Steam Engine

 

[VapeonLivelong]

Look for A1 Kanthal wire. Maybe 28 gauge.

Play around with a "coiling calculator" to determine how many wraps and what size diameter tool you would need to wrap on. Steam Engine

Hi Susan,
These are the parameters

Height: 18mm
Diameter: 10mm

 

[IMFire3605]

28 or 30 awg Kanthal A1 (metric diameters of the wire (28awg 0.321mm, 30awg 0.255mm))

Best place to get it is Temco Industrial Power, you can find them on Ebay, Amazon, and their direct website here
http://www.temcoindustrialpower.com/search.html?&category=Resistance_Wire&c=0002000&page=1

Susan also pointed you in the good direction with Steam Engine, its coil building simulator is pretty easy to learn and play around with
with 28awg I using these variables

1.0ohm target
2.0mm inner diameter (diameter of wrapping mandrel)
single coil
gives an output of needing 7 half wraps (top)/6 full wraps (bottom)

 

[VapeonLivelong]

Thanks guys.
All this is sounding like Greek and latin to me, since i'm new to this rebuilding stuff.