So I just bought a freemax mesh pro tank. and when it was working I loved it however when I change the coil that mod would not recognize it. At first I thought it was just the mod but putting a different tank on it worked. So I put my mesh pro on my other mod and again the mod didn't recognize it. I tried 3 coils and none worked. Anyone have a fix or a problem like this with them? I love this tank and would hate to buy a different one. Maybe defective? I use a smok mag 225W TC
Freemax mesh pro won't work
- Thread starter Lucario_Trash
- Start date
- th_trl_thread_readers 0
- Status
I don't own that tank. But if it was working fine before you changed the coil, my guess is there is some sort of user error in play here.
If multiple mods are not recognizing the tank, then the tank's electrical connections are not functioning correctly. This could mean the new coils were not installed correctly or are defective, or something is wrong with the 510 connection of the tank (damaged insulator?).
Is there a vape shop that you could visit that could help you trouble shoot your issue?
If multiple mods are not recognizing the tank, then the tank's electrical connections are not functioning correctly. This could mean the new coils were not installed correctly or are defective, or something is wrong with the 510 connection of the tank (damaged insulator?).
Is there a vape shop that you could visit that could help you trouble shoot your issue?
Last edited:
Check the bottom of the atomizer. There is a slot for tightening your connection on the atomizer end. Also, I find that it may leak fluid there and sometimes gunk up if the fluid dries out. My last though it possibly a bad coil which I have not yet experienced but there's always going to be a first time. Hope this helps. I wouldn't give up on this tank though. There are so many pro's and very few con's.
You may have inadvertently pushed the 510 pin on the tank too far up for it to connect. If the pin isn't protruding or at least flush take out the coil and gently push it out a tiny bit.
+1 for taking it to a shop or experienced vaper.
+1 for taking it to a shop or experienced vaper.
I'm .go going stop by the one I normally go to fridFr if I can't fix it. He said he'll look at it if I cannot fix it
I fixed it the bottom part of the coil was too high so I moved it a lower. Thanks for the help guys really appreciate it!
This is an issue I remember having as an inexperienced vaper back in the day. I suspect it’s a right of passage of sorts. 10+ years later and they still put the bottom pin into a rubber grommet and let it free float.
I wonder if there is a list of basic trouble shooting tips somewhere? There probably is. This forum is a bit like Aladdin’s cave. All the wonders of the world but good luck finding something specific.
@BrotherBob seems to be good at that kind of thing. I’m not.
You might want to take it in to the local B&M vape shop and have them check for a short between the coil and the positive pin.
For a personal custom response to a reply, you can click "like" (the thumbs up) icon,or other icons, at bottom right hand corner of this post or previous posts. This action will also serve notify the poster of your chosen noted response.
Could fill in your location, it may help you in obtaining location specific information to your question(s).
On the top right hand corner of this post you will find --"your name" next to "Inbox and Alerts"
Place the mouse pointer on your name. You will get a drop down and on the left hand side of this drop down you will find "Personal Details". Click Personal Details.
In Personal Details, in middle of screen in gray, you will find "Location" Could fill that box line in.
re: New users - Put your location in your Profile...
- Status
Similar threads
