eCigMods.com - VapeZilla User Instructions

[Craig Patterson]

Instructions for use:

• Clean Copper tubing - Some models are coated with a lubricating oil inside the copper pipe. I have tried to clean them out before assembly, but its leaving a bad taste. I used rubbing alcohol, water and juice to clean the tubes. In several ones I tested, the bad taste goes away rather quickly. I do not see why it wouldn't in the others... so I don't think the flavor will stick around for very long. I have included, with each kit, a 3ML bottle. Fill this bottle with rubbing alcohol and mount it to the top of the copper pipe. (The part that the atomizer covers. Make sure you have a large bottle in the bottom. Squeeze the whole bottle through the copper pipe. Repeat 3 times with rubbing alcohol and 2x with water. Any residue, or flavor that I tested on this, will go away.
• Insert your atomizer - Match up your hole in the atomizer so that the copper tube fits inside. Screw in as normal.
• Removal of bottle - DO NOT JUST PULL APART. Wires and copper tubing are attached to both parts of the plastic enclosure. With batteries removed, gently tug the bottom part out about 1 ½ inches. Unscrew bottle and pull down to remove. Fill bottle and screw back in. Close the enclosure and put the batteries back in.
• Priming your VapeZilla – Without using power, give a good strong suck on your atomizer for 15-20 seconds. This will wet your atomizer and prime the tube. After this, regular sucking will keep the liquid flowing at a small rate, keeping the atomizer wet.
• Clean as normal.
• On/Off – While there is no “True” on/off switch, the unit can be safely put in your pocket while in the “USB” mode. There will be no power going to the unit when it is switched to this mode unless a USB cable is plugged in to the device and a PC/Laptop. That is not likely to happen with this in your pocket.

Remember, your VapeZilla has a 6 Month replacement program. It does not cover abuse or damage done to the enclosure.

Thanks for your purchase! I hope you enjoy it.


Craig Patterson
eCigMods.com

 

[umjim]

Instructions for use:


regular sucking will keep the liquid flowing at a small rate, keeping the atomizer wet.

He He ........

 

[ejoker]

aren't we all happy that it isn't the elendil anymore?

 

[Craig Patterson]

lol no kidding.

Craig

 

[WhatAClumsyGirl]

Thanks for the instructions.

So...how many have shipped out as of today ?

 

[CloudBurst]

Cool, thanks Craig!

 

[WhatAClumsyGirl]

Wondering how many have shipped ....

 

[CloudBurst]

Me too, since it changes daily!

 

[Amajn]

A update Craig?

 

[sanfordf]

Having some trouble getting to the site. It keeps redirecting to Zencart.

 

[Craig Patterson]

Yah, i ran off with your money. Check the site. Updating the cart in prep for merchant account. Still working on boxes. Please be patient.

Craig

 

[Brad524]

A05 still waiting patiently!

 

[WhatAClumsyGirl]

I think we've been patient.....already.

 

[unsure]

 

[sanjosse]

WOW, really, this guy seems to be busting his ... for us. So I think everybody needs to step off and have a tad bit of understanding for him. If you don't agree, that's fine. I for one, will be standing here, next to a guy, who I think is doing the best he can!

 

[CloudBurst]

I don't normally get into this kinda stuff but...I don't think anyone is really busting him, they (we) just want honesty. We understand things happen but we have been here from Day 1 and just want to know when we'll be receiving our purchase. I paid for mine on April 6th with an estimated date of May 1st, this is May 23rd and we've even been told once they shipped through A10, then they didn't ship. This is not good news to those waiting. I could have understood a week or 2 later but 3 weeks with little explanation.
I don't doubt Craig is a good guy. Nuff said...we're all behind you Craig.

 

[Craig Patterson]

I don't normally get into this kinda stuff but...I don't think anyone is really busting him, they (we) just want honesty. We understand things happen but we have been here from Day 1 and just want to know when we'll be receiving our purchase. I paid for mine on April 6th with an estimated date of May 1st, this is May 23rd and we've even been told once they shipped through A10, then they didn't ship. This is not good news to those waiting. I could have understood a week or 2 later but 3 weeks with little explanation.
I don't doubt Craig is a good guy. Nuff said...we're all behind you Craig.

Bah... I explained this already. I posted this right as I started prepping to ship... but paypal killed my account when I got 4 labels printed.. .so I shipped those and forgot to edit the post. I went back and retested a USB jack, cause mine was flaking... and low and behold so were the others that I had finished. I've spend two days going back and repairing the USB jacks.

I've been totally upfront and honest about everything. If I had known I was going to have so many problems with these... trust me, I wouldn't be making them.

Craig

 

[Craig Patterson]

I don't normally get into this kinda stuff but...I don't think anyone is really busting him, they (we) just want honesty. We understand things happen but we have been here from Day 1 and just want to know when we'll be receiving our purchase. I paid for mine on April 6th with an estimated date of May 1st, this is May 23rd and we've even been told once they shipped through A10, then they didn't ship. This is not good news to those waiting. I could have understood a week or 2 later but 3 weeks with little explanation.
I don't doubt Craig is a good guy. Nuff said...we're all behind you Craig.

BTW. you can pick yours up Tuesday.

Craig

 

[gamedemon]

Craig A13 here. Do you need my address ? Sorry.. I am confused and cannot follow on all message.

 

[Craig Patterson]

Juniper lane, right?

Craig