Copper Flagship MOD by SMK

[tayone415]

I'm so tempted to by this even though I just picked up an authentic mod a few days ago, because the price is so cheap for a full 1 piece body copper mod. It's going for $120 at my local B&M the same price as online stores. I'm not sure when this MOD came out, because I can't really find any reviews on it yet.

From their Facebook page:

SMK Mods LLC
June 29 ·
SMK Mods will be releasing the flagship mod in a matter of just a few weeks! You will be able to fully customize the mod from the top cap, tube, button housing, down to the button.
We will offer: Brass, Copper, Aluminum, and Stainless Steel.
Selling Points:
- Pure copper floating contact on top, pure copper contact on bottom.
- Adjustable delrin button housing to eliminate battery rattle
- .1+/- .1 voltage drop
- 22mm diameter
- A nice tight spring loaded button, with a one of a kind design within the housing to maximize conductivity.
- All pieces are interchangeable to allow a custom look to your mod.



SMK Mods LLC
August 8
A customer of ours just wrote this message to us, and I thought we would share it with you all

"I tested my hardest hitting mods. This is a comparison test.
Test done with authentic TOBH V2.5 built at .16 4 wraps kanthal 22ga duel coil sleeper
Each test was with a fully charged sony vct5
All the mods were spotless to perform test
Flagship 3.78
Brass manhattan 3.61
Copper manhattan 3.75
Alum manhattan 3.51
Beast mod 3.64
Heimdall brass 3.60
4nine copper 3.72
Copper nemesis (clone) 3.69
Brads nemesis (clone) 3.62
Grand vapor sentnal (old school) 3.60
Those are the best mods I have.

Flagship is the best hitting mod I have to date. With the ball bearing switch it NEVER arks the negative contact only mod I have used that does that."
----------------------------------------------------------------------------------------------------

Anyone know about this MOD or owns one?

 

[Cullin Kin]

It actually looks really similar to the Manhattan in design (I own an authentic and two clones). I would buy that flagship, looks very nice. I like a lot.

 

[tayone415]

It actually looks really similar to the Manhattan in design (I own an authentic and two clones). I would buy that flagship, looks very nice. I like a lot.

It does look similar just a 22 mm body instead of the 23 mm body of the Manhattan. I actually prefer the 22 mm body.

What do you have Manhattans or Flagships?

 

[Cullin Kin]

It does look similar just a 22 mm body instead of the 23 mm body of the Manhattan. I actually prefer the 22 mm body.

What do you have Manhattans or Flagships?

Yeah, I have a few 22mm for their sleekness. I have a few Manhattans, but I would surely purchase the Flagship if I hadn't already spent an insane amount if money on mods the past couple of months lol.

 

[tayone415]

Yeah, I have a few 22mm for their sleekness. I have a few Manhattans, but I would surely purchase the Flagship if I hadn't already spent an insane amount if money on mods the past couple of months lol.

That's why I didn't buy it today. The last 2 days I bought an authentic Paragon v2 limited midnight edition mod and a black 2 puffs drip tip and a black fogger which put me a little less than $300.

 

[Cullin Kin]

That's why I didn't buy it today. The last 2 days I bought an authentic Paragon v2 limited midnight edition mod and a black 2 puffs drip tip and a black fogger which put me a little less than $300.

lol, I hear ya! I could have never guessed how big of a hole this hobby would burn in my pocket, wallet, and bank account.

 

[tayone415]

lol, I hear ya! I could have never guessed how big of a hole this hobby would burn in my pocket, wallet, and bank account.

Yeah, I was saving money when I started DIY e juice, now I'm not so sure since last month I just but a full authentic setup too and now I've barely even use that mod since I got my new one.

 

[HecticEnergy]

sorry for reviving a dead thread buttt....
What is the height on this thing? I've looked all over for it and cant seem to find anything indicating the height other than its "about a half inch taller than the vanilla mech mod" which is about 9.4cm/3.78in
anyone with a flagship and ruler willing to measure and post?

 

[tayone415]

sorry for reviving a dead thread buttt....
What is the height on this thing? I've looked all over for it and cant seem to find anything indicating the height other than its "about a half inch taller than the vanilla mech mod" which is about 9.4cm/3.78in
anyone with a flagship and ruler willing to measure and post?

I ended up buying it, I don't have a ruler ATM, but it is a taller MOD, here's a pic standing next to an authentic Vanilla and authentic Paragon V2, that might give you a better idea?

 

[TheJakeBailey]

Well, how do you like it??? Give us the goods man! Lol. I'm pretty interested in trying out that switch!

 

[Violation]

It Seems like the copper mod? I've seen it on a new website hek-vapor, very cool design. why not get it ?

 

[tayone415]

Well, how do you like it??? Give us the goods man! Lol. I'm pretty interested in trying out that switch!

This mod does hit hard, the only issues is it has right now is if you want to take the firing button apart to clean it, you need another person to help take it apart and put it back together. The switch in the beginning was way too stiff, and sometimes I needed two hands to fire. The threading could of been better, but after use it feels smoother now. Over all for a full copper authentic mod for $120, there's no authentic ATM that I know about yet that can beat this mod IMO. The biggest issue for me is just taking the switch apart and putting it back together, since you need two people and have to be careful not to lose the three ball bearings and they will pop out when taking the switch apart so you need something to catch them in when it comes time to clean.

 

[tfraley]

Picked this mod up myself from a local shop to replace my nemesis clone.

 

[tayone415]

Picked this mod up myself from a local shop to replace my nemesis clone.

It hits way better than any Nemesis clone. ...if you're vaping nic this mod can help lower your nic levels.

Sent from my SPH-L900 using Tapatalk

 

[HecticEnergy]

still no measurements?

 

[tayone415]

still no measurements?

It's somewhere between 4-4.25 inches. I don't have a good ruler.

Sent from my SPH-L900 using Tapatalk

 

[HecticEnergy]

It's somewhere between 4-4.25 inches. I don't have a good ruler.

Sent from my SPH-L900 using Tapatalk

Thats better than nothing! thanks!
Is it much taller/shorter than your nemi?

 

[tayone415]

I compared it only to my authentic vanilla and paragon v2. I have a nemesis clone somewhere that's supposed to be a 1:1, if I find it I'll try to compare it, but ATM I don't know where I put any my clone vape gear.

Sent from my SPH-L900 using Tapatalk

 

[HecticEnergy]

lol - thanks - no worries

 

[jefffo5ter]

Approximately 4 1/8 inches tall, including the button. I just put mine on a ruler. I love it, btw. Had it 3 weeks, bought the copper version. I've heard people say that it's the best mod for the money... I can honestly say it's the best mod I own, period. I've spent over $200 on mods a couple of times, this outperforms them all.