Aspire nautilus rebuild coil

[DirtyJon]

New to buildings coils. I have a aspire nautilus I would like to rebuild if possible but not sure if realistic. Some say you can't do protanks an some say you can. Have Helios and do fine with that do realize major size diff but not big deal really to me
ty for input

 

[FeelinFoggy]

New to buildings coils. I have a aspire nautilus I would like to rebuild if possible but not sure if realistic. Some say you can't do protanks an some say you can. Have Helios and do fine with that do realize major size diff but not big deal really to me
ty for input

Here is a video to answer your question....
https://www.youtube.com/watch?v=VAmIJIUeEUg

 

[WharfRat1976]

There is another vid where the coil is installed from the bottom that wicks better. I also think removing the inner sheath helps it wick better. Do not try to drill out the absorbtion holes in the head...it will flood it more. I think another problem is in the design of the lower chamber...

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[NCCNC]

I agree that removing the inner sheath helps.

 

[j5m0K5ki]

Got a link to this said video?

 

[NemesisBliss]

Check this out....I didn't buy this kit but did replicate it and it works flawlessly. Just drill out an old coil shell (1.4mm drill bit) at the existing air holes, pushed new microcoil in from the bottom, run needle thru the drilled out shell and coil ,reinstall your grommet and pin with everything lined up, cotton wick(trim wick close like you would a kanger rebuild) and your done!
Only rebuild I have got to work consistently with the Nautilus
https://www.youtube.com/watch?v=MaTEPTzqbI8

 

[Marisela Sol Maldonado]

This is just special! Thank you for sharing it! Looks like all you really have to do is drill out the holes to make them big enough to fit a mini screw driver in to position the coil.....

 

[lgustavus81]

Gonna have to try it out with some of my old coils!

sent from my damned S4!