I got the Pearl White version of the Flexus Pro for this test, the paint appears bright and durable. The side profile has a reduced section and shows a simple and clean design on one side, on the opposite side there is the AFC system which is adjustable through a small and robust sliding metal knob to easily select a reduced air flow (MTL) or an open airflow (RDL).
Flexus Pro uses IML plastic decoration technology, the aesthetic result is impeccable, the version I received for this test shows light shades of color with a wave pattern which also create some reflections depending on the point of exposure to light, all this in a discreet and elegant way on the white background. On the back there is the aspire logo in red and the vertical Flexus PRO writing in silver characters. The control panel contains a 0.54" monochrome OLED display located in a lower corner, the unusual position does not affect its consultation, the fonts are enlarged, clearly visible and bright, you can see the remaining battery charge level, read the set power, the resistive value of the coil and the duration of the last puff. The square-shaped fire button is slightly protruding, does not wobble and is easily reachable by the fingers.
► Aspire Flexus Pro Kit; Operation Guide:
Five clicks to turn on/off the device. To set the power manually from 5 to 30W, press the Fire button 3 times to adjust, at this point the power value flashes, then with each subsequent click the value increases by 1W at a time. The battery charge level is represented by a 5-bar indicator and the exact percentage on a scale of 1 to 100%.
Aspire Flexus Pro Kit offers you 3 different firing modes (automatic, manual or both). Set your favorite mode by clicking the Fire button 4 times consecutively.
• A Mode: The Fire button is deactivated, so you can safely put the device in your pocket. The only available mode is automatic extraction.
• B Mode: The Fire button is activated.
• A B Mode: You can activate the device either automatically or manually.
Aspire Flexus Pro Kit implements the following security features integrated into the ASP chipset:
• 7s cut-off protection
• Over-discharge protection
• Overload protection
• Short circuit protection
• Overheating protection
• Low voltage protection
Inside the compartment/pod there are naturally the electrical contact pins and the sensor for automatic activation of the puffs. The attachment system uses two small but very powerful magnets that mirror those present on the bottom of the cartridge.
► Refillable Cartridge & Replaceable AF Coils:
The cartridge is made of PCTG with excellent transparency for optimal control over the internal e-juice level. On the side of the cartridge there is an orange silicone rubber that can be lifted for filling. Always on the bottom of the cartridge you can extract or insert the AF Coil you prefer.
In the Flexus Pro package there are two different AF Mesh Coils; The pre-installed 0.6Ω Mesh Coil AF is designed for cloud chasers, while the additional 1.0Ω Mesh Coil AF is suitable for MTL with different e-juices, even with nic salts.
The platform of cartridges available for Flexus Pro is quite broad and it is possible to use and purchase the 2ml disposable cartridges with integrated resistance separately.
► Aspire Flexus Pro Kit; Vaping Test & Final Conclusions:
The vaping test took place with TOB's Hypnos which is a creamy e-liquid that I know very well and which also made me appreciate this brand new Aspire device.
• AF Mesh Coil 1.0Ω (12W-15W) Kanthal AF - MTL :
This resistance is suitable for those looking for a very narrow type of MTL Puff. The flavor expresses itself quite well in terms of aroma. The AFC adjustment for MTL is perfect, you can adjust the slider to maximum closure of the air passage without any problem.
• AF Mesh Coil 0.6Ω (15W-18W) Kanthal AF - RDTL:
This Coil is excellent for my way of vaping, with 15W of selected power and with AFC wide open it fully satisfies me because it has a strong and rich delivery of flavor and is capable of producing dense clouds of vapor. The air passage of Flexus Pro is not dispersive even at the maximum degree of opening and this feature (with this coil) amplifies the hit in the throat (Hit), optimizing nicotine intake. All this is really interesting for those who have recently abandoned cigarettes and for this reason are looking for satisfaction and immediate results. With both resistors there are no spitting phenomena, the formation of condensation between pods and contacts is really reduced to a minimum, almost non-existent. The excellent AF Mesh Coils are managed beautifully by the ASP chip and the specific AFC for MTL, with a good result also for RDL in combination with the use of the 0.6Ω AF Mesh Coil.
Flexus Pro is a simple Pod kit with an elegant compact design that is extremely comfortable to use. Equipped with an internal 1,200Ah battery together with the 3ml capacity tank, it guarantees good autonomy, ideal for covering an entire day of vaping without having to recharge the battery or the tank. The ASP Chipset with Oled display uses 3 different selectable vaping modes to perfectly meet the user's needs. The excellent AF Mesh Coils are handled beautifully by the AFC system which has precise and specific adjustment for MTL and RDL.
• I would like to thank Aspire for providing me with this device. I hope this review has been helpful for anyone looking to purchase the Flexus Pro Kit.
Aspire has revolutionized the vaporizer industry with its innovative and high quality products, provided powerful vaping devices to our customers looking for alternatives to smoking.
www.aspirecig.com
• Thanks for reading.
