510 to 510 connectors but not ego threaded

[chellie]

Hello - I had posted before and I do not think I was specific enough.

I have a Kbox nano in purple and it has a 510 connection where there is a hole in the kbox and the tank screws in and sits flush with the kbox and looks nice.

I vape a lot and fill the tank alot and want to not damage the threads - I am careful thought that if I had a 510 to 510 connector I would just have to remove the tank from the connector part and life would be good.

I have a 510 to 510 connector that is ego threaded and it looks ridiculous.

I was wondering if there are just 510 to 510 connections where the screw part goes into the hole and the part that sticks up is fairly low profile. (in my my mind it would have an extender on the base so that the tank still looks like it is sitting flush)

It would be great if they made connectors model specific but I haven't seen that.

I've been searching and can't find what I want. All I find is 510 to 510 ego threaded.

Does anyone have any suggestions or links so that I can find a low profile type of connector that will work and look decent on a subtank Nano?

 

[IMFire3605]

Yes, I know what you are looking for...been a long time since I've needed one, most common from way back with a 510 drip atomizer, drip shield, the extender was needing to make the atty extend out of the drip guard, they come in unsealed (hole in the pin useful with bottom feeding mods, or sealed, no hole in the pin)

Unsealed
http://www.myvaporstore.com/510-to-510-Adapter-Extender-p/510-510.htm
http://www.kidneypuncher.com/short-510-to-510-unsealed-adapter/

Sealed
http://www.madvapes.com/v2-510-shorty-extension-sealed.html
http://www.vaporbeast.com/510-to-510-shorty-battery-extension-adapter.html

 

[puffon]

Something like this:
http://www.hoosierecig.com/Airflow-Controller-for-510_p_948.html
It's 22mm
You could close off the airflow control

or
http://brokevapers.com/510-heatsink-adaptor/

 

[chellie]

Yes, I know what you are looking for...been a long time since I've needed one, most common from way back with a 510 drip atomizer, drip shield, the extender was needing to make the atty extend out of the drip guard, they come in unsealed (hole in the pin useful with bottom feeding mods, or sealed, no hole in the pin)

Unsealed
http://www.myvaporstore.com/510-to-510-Adapter-Extender-p/510-510.htm
http://www.kidneypuncher.com/short-510-to-510-unsealed-adapter/

Sealed
http://www.madvapes.com/v2-510-shorty-extension-sealed.html
http://www.vaporbeast.com/510-to-510-shorty-battery-extension-adapter.html

Thanks and thanks for explaining the difference between sealed and unsealed.

 

[chellie]

Something like this:
http://www.hoosierecig.com/Airflow-Controller-for-510_p_948.html
It's 22mm
You could close off the airflow control

or
http://brokevapers.com/510-heatsink-adaptor/

Oh wow - thanks - that is EXACTLY what I have pictured in my mind and I did not how well I was articulating it. I am ordering it right now and will close off the airflow control and give it a go.

 

[AzPlumber]

Oh wow - thanks - that is EXACTLY what I have pictured in my mind and I did not how well I was articulating it. I am ordering it right now and will close off the airflow control and give it a go.

If your tank's 510 connection is sealed it won't matter if the air hole on the adapter is open or closed.

 

[chellie]

If your tank's 510 connection is sealed it won't matter if the air hole on the adapter is open or closed.

That helps. I just ordered the airflow control and while I was there I ordered the shorty too and it said sealed but the pic looks like it's unsealed so good to know.

 

[chellie]

Something like this:
http://www.hoosierecig.com/Airflow-Controller-for-510_p_948.html
It's 22mm
You could close off the airflow control

or
http://brokevapers.com/510-heatsink-adaptor/

I ordered two of them!! Most of theones I searched for say they are 22mm which is too big but according to their answer at hoosier "... they are sealed and they are 0.75 in or 19.05mm in diameter." which would fit my nano perfectly so I hope they really are 19mm.